Page 1 of 1
A20M firmware
Posted: Fri Jan 03, 2020 3:31 am
by pawien
I want to flash my A20M on Marlin 2.xx with Arduino.
Who has conf.h and conf.adv for me. with 3dtouch.
Re: A20M firmware
Posted: Fri Jan 03, 2020 9:39 am
by William
Hi, Currently you can use the hex format firmware on the official website,
https://www.geeetech.com/download.html?download_id=33
Then upload it using the firmware kit.
Or look for the vert setting.
Re: A20M firmware
Posted: Fri Jan 03, 2020 5:39 pm
by pawien
Thank you
Re: A20M firmware
Posted: Fri Jan 03, 2020 5:44 pm
by pawien
HI
I do not find it
Re: A20M firmware
Posted: Fri Jan 03, 2020 5:59 pm
by William
Hi,You can download the corresponding firmware you need to download here:
- L}SB83AN9AHV}7452RIBGEL.png (34.77 KiB) Viewed 9064 times
Re: A20M firmware
Posted: Fri Jan 03, 2020 6:47 pm
by pawien
HI
Thank you
But I wanted the config.h with 3d touch because I can set it to German.
I would like to use Arduino 1.1.9 or 2.0
Re: A20M firmware
Posted: Sat Jan 04, 2020 9:09 am
by William
Hi,If so, you can look up the settings for vert.