Page 1 of 1
A20M issues
Posted: Tue Dec 17, 2019 6:23 am
by kevinmoore1337
So i bought an A20M second hand. It powers up the lcd screen turns on with nothing on it, the power supply is reading back 24v. I cannot connect it via usb to computer as it doesnt even know it was plugged in and yes the usb drivers are installed. Is this a Bad control board? or just one with no bootloader/firmware?
Re: A20M issues
Posted: Tue Dec 17, 2019 6:24 am
by kevinmoore1337
Also one of my stepper drivers is pretty warm compared to the other ones even if i move it from one socket to another
Re: A20M issues
Posted: Tue Dec 17, 2019 9:38 am
by William
Hi, You can try to install the driver manually,
You can refer to this specific method:
https://www.geeetech.com/forum/viewtopi ... RlcFtWdCG4
Then see if you can connect to the computer.
If you can connect to the computer, you can download the firmware on the official website:
https://www.geeetech.com/download.html?download_id=33
Then flash the firmware.
viewtopic.php?f=20&t=69684
Re: A20M issues
Posted: Tue Dec 17, 2019 9:55 am
by kevinmoore1337
i have already tried that and that didnt work
Re: A20M issues
Posted: Tue Dec 17, 2019 10:13 am
by William
kevinmoore1337 wrote: ↑Tue Dec 17, 2019 9:55 am
i have already tried that and that didnt work
Hi,If so, you can contact your sales representative to replace the motherboard.