Page 1 of 2
Dual Axis Z
Posted: Mon Jan 21, 2019 10:13 pm
by pepgra
Someone has installed a double Z axis, I want to make this improvement...
Re: Dual Axis Z
Posted: Wed Jan 23, 2019 11:44 am
by Lexan
why ?
Re: Dual Axis Z
Posted: Mon Feb 11, 2019 11:58 am
by davesatu
is it an improvement?
Be very careful before changing anything as obviously the maker has worked out most stuff.
Re: Dual Axis Z
Posted: Wed Feb 13, 2019 2:47 am
by pepgra
There is too much drop of the axis, although eccentric adjustments the problem is not solved, I am thinking of a modification to put another z, there are easier kit for other printers, but they do not fit in this design, you have to create one.
Re: Dual Axis Z
Posted: Mon Feb 18, 2019 3:14 pm
by William
You can feedback it to :
technical@geeetech.com
Re: Dual Axis Z
Posted: Fri Jan 03, 2020 3:58 pm
by YvonGeee
Hello,
Anyone did the mod?
Thanks!!
Re: Dual Axis Z
Posted: Sat Jan 04, 2020 10:48 pm
by Jarda3d
You did not need it if your printer is tighted and aligned.
Re: Dual Axis Z
Posted: Thu Jan 16, 2020 9:55 pm
by redangel1984
Yes I did the upgrade for all my A printers.
Re: Dual Axis Z
Posted: Thu Jan 16, 2020 10:05 pm
by YvonGeee
@redangel1984
Hello,
Any pictures, hints, how to?
thanks!!
Re: Dual Axis Z
Posted: Thu Jan 16, 2020 11:51 pm
by redangel1984
https://www.thingiverse.com/thing:4049225
If you have any questions feel free to PM me on Facebook: Akos Wonerth