Extruder order

Post Reply
MaxiBelas
Posts: 1
Joined: Thu Sep 09, 2021 2:16 am

Extruder order

Post by MaxiBelas » Thu Sep 09, 2021 3:31 am

Hi everyone, I recently bought an A20M. Today I did the assembly but it is not clear to me the order of the two extruders.
In some videos, looking at the machine from behind, extruder 0 (E0) must be on the left, while extruder 1 (E1) must be on the right.
Is this thing correct? I have seen this setting on some videos, but in many others the exact opposite. What should be the correct fit?10.0.0.0.1 192.168.1.254
Top
Post Reply

Return to “Geeetech A20M”