Head cooling fan not spinning
Head cooling fan not spinning
Hello,
On my A20M: the 2 fans that are cooling the head (ones on the side) are ok.
The one that is cooling the output (one on the front) stopped working.
I checked with a 6V battery and the fan runs.
When I measure the voltage to the fan, it is zero when fan is off, then it sticks to 0.2V whatever level I send with the proper command.
So cabling is good, I triple-checked it.
I suspect Mosfet is dead, can you tell me where it is on the board and how to get a new one/reference?
Thanks in advanced,
Yvon
On my A20M: the 2 fans that are cooling the head (ones on the side) are ok.
The one that is cooling the output (one on the front) stopped working.
I checked with a 6V battery and the fan runs.
When I measure the voltage to the fan, it is zero when fan is off, then it sticks to 0.2V whatever level I send with the proper command.
So cabling is good, I triple-checked it.
I suspect Mosfet is dead, can you tell me where it is on the board and how to get a new one/reference?
Thanks in advanced,
Yvon
Re: Head cooling fan not spinning
Hi,it is recommended that you replace the motherboard directly.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Head cooling fan not spinning
Thanks William.
This is less than a year old, how can I get one?
Thanks.
Yvon
This is less than a year old, how can I get one?
Thanks.
Yvon
Re: Head cooling fan not spinning
Hi,if your machine is still under warranty, you can contact the salesperson to replace it.
Or tell me to buy the platform, country, order number, and let my colleagues send you.
Or tell me to buy the platform, country, order number, and let my colleagues send you.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Head cooling fan not spinning
Hi,
I bought it on Amazon, France. On september 30th 2019.
Order# 406-3642553-1451569
Seller is GT-OFFICIAL EU
Thanks.
I bought it on Amazon, France. On september 30th 2019.
Order# 406-3642553-1451569
Seller is GT-OFFICIAL EU
Thanks.
Re: Head cooling fan not spinning
Hi,you can burn the firmware again to see if a fan turns.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Head cooling fan not spinning
Just did it, stuck to 0.2V
Re: Head cooling fan not spinning
@William
What next you can propose?
Thanks.
What next you can propose?
Thanks.
Re: Head cooling fan not spinning
Hi,you can contact the seller directly for replacement.
Or you can provide email for us to confirm.
Or you can provide email for us to confirm.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Head cooling fan not spinning
Buenas tardes amigos yo también tengo el mismo problema que tu as podido soluciona?
Good afternoon friends, I also have the same problem that you have been able to solve?
Good afternoon friends, I also have the same problem that you have been able to solve?