how print only with 2nd extruder with cura

maverickk89 · Post by **maverickk89** » Thu Apr 23, 2020 3:35 pm

hello,
I'm using Cura 4.6 and I would like to know how to print using only the second extruder, it's annoying change often the filament when I mainly use two colors....
I tried to disable first filament on the menu above the model but it seems to not work...

Post by **William** » Thu Apr 23, 2020 4:48 pm

Hi, you can adjust the color mixing ratio on the screen 0: 100 is the second extruder work:
1. Select "Mixer", press the knob, turn the button to select "Mix: 0%; 100",
adjust the mixing ratio, and press the knob to confirm the setting.
2. To quickly switch the ratio between E0 and E1, select "Toggle mix" to switch.

maverickk89 · Post by **maverickk89** » Thu Apr 23, 2020 5:45 pm

ok but where could I found "mixer"? I cannot see it...

Post by **William** » Thu Apr 23, 2020 6:01 pm

Hi，it is on the main menu.

: QQ图片20200423175741.png (128.75 KiB) Viewed 7165 times

maverickk89 · Post by **maverickk89** » Thu Apr 23, 2020 6:11 pm

is there away no set it directly on Cura? (preferring not using gcode manual customization)?

Post by **William** » Thu Apr 23, 2020 6:36 pm

Hi，you can use color mixing software，refer to viewtopic.php?f=92&t=61760.
Hope to help you.

maverickk89 · Post by **maverickk89** » Fri Apr 24, 2020 4:14 am

solved, it was just to right click to the element and decide with estruder has to print it...
in any case thank you

Post by **William** » Fri Apr 24, 2020 10:54 am

Geeetech

how print only with 2nd extruder with cura

how print only with 2nd extruder with cura

Re: how print only with 2nd extruder with cura

Re: how print only with 2nd extruder with cura

Re: how print only with 2nd extruder with cura

Re: how print only with 2nd extruder with cura

Re: how print only with 2nd extruder with cura

Re: how print only with 2nd extruder with cura

Re: how print only with 2nd extruder with cura