Geeetech

Hi,

Is there any other hotend useable for the G20 ? Is this available in Europe as well? Thanks.

Best,
Midman

Hi, the A20 uses the nozzle of MK8.

Thanks, but I didn‘t just need the nozzle, but assuming a new hotend as the nozzle is not removable. I am afraid the threaded is flawed as the nozzle moves, but did not come out of the lower part of the hotend. Therfore I was wondering if there is a higher quality hotend available for the A20. Or even a source ti order the original one in europe as from china it takes many weeks.

3D printing is in trending now a days . Many people are facing problem in learning it. You can get the hotend easily if you search in right place. If you need 3D assignments you can get help from the paper writing help. Hotend is not difficult to find keep searching you will get it soon.

Test your intelligence with klondike solitaire, great entertainment with

There are many hotends available in Europe, but not all of them can be used for the G20. Some countries have their own specific hotends which are not compatible with the European ones.
Shure products