Geeetech

Hi hope you all can help just build a i3 pro b but having problems printing anything.
when I do the extruder calibration the fillerment come out of the extruder when you move the extruder access to 100 . Any ideas
thanks https://100001.onl/ https://1921681254.mx/ .

Hi hope you all can help just build a i3 pro b but having problems printing anything.
when I do the extruder calibration the fillerment come out of the extruder when you move the extruder access to 100 . Any ideas
thanks. https://19216801.onl/ https://routerlogin.uno/

Hej, I just installed the 3D Touch on My I3 Pro W with selve printed mount from instruction, installed the Firmware from this Forum for this and added Code G29 in Cura for My prints. I can see that the Printer is doing the autolevelling, but the result in Z axis is just a few Millimeter too high, th...

I recently got an acrylic Geeetech i3 pro b, i built it using the instructions and YouTube tutorials, and for the most part it works, however the z-axis constantly provides trouble. I manually adjust the z-axis so that its perfectly level, i use a spirit level to check and i measure the distance fro...

Hi,
is it possible to remove an unused extruder and hot end from i3 pro c?
I already have removed the stepper, but if I remove the temperature sensor the printer Fail.
If I upload Pro b firmwere, would it work https://snaptube.cam/?

Hello, I'm new to the forum - just built the i3 Pro W; had all the usual teething problems and got through to my first print of a Benchy which went fine. However I haven't been able to get another successful print out because the nozzle starts to drag into the model after a few layers of printing - ...

locations are neatly arranged throughout; the surface of this cigarette is tidy and overlapped. Where there is not any smoke, fake cigarettes might possibly be the opposite. The mouthpiece of this cigarette is full and will never leak. Fake cigarettes generally not have any filter inside typically t...

I just bought a second hand geeetech i3 pro b from eBay for £20 I currently have an Ender 3 so am printing a spool holder and PSU cover currently but wondered if anyone with this printer already could recommend any upgrades that are important (I already have yellow bed springs spare from a set for m...

TL;DR: Does Geeetech's dual extruder Prusa i3 worth the money? Hi, I'm new to 3d-printing, and I was looking to buy a 3D printer for home use. Sadly, I don't have much money so is the highest price I can pay for a printer. Because most of the American websites offer expensive printers (or printers t...

My first printer I bought was a Geeetech Prusa. I bought it when I new nothing about printing. I hardly ever use it. I just wanted to Know does this printer have the same problems https://19216801.onl/ https://routerlogin.uno/ of say a Anet A8? Dodgy PSU, Mainboard, Bed wires and connectors. I'm ass...