Geeetech

Hi, I am trouble shooting an issue where why infill is incomplete. It seems like the nozzle isn't extruding continuously while printing infill, Dropping the infill speed in Cura down to 60mm/s, still doesn't solve the issue. This is with the grid pattern, at 20% infill. This print was stopped halfwa...

Supprimer les codes que tu m'as indiqués semble avoir résolu le problème,
La buse et le plateau atteignent maintenant les températures voulues.
Merci beaucoup.

Merci Lavegnir,
J'essairai cela.

When preparing to print, the nozzle temperature changes to 215 degrees after heating to the temperature actually indicated in the g-code, I use Cura, and when trying to set nozzle temp to 190 degrees, the printer initially reaches that temperature but then switches to 215 degrees right before printi...