Geeetech

That happened to me too! I just kept moving the 3D Touch down a mm or so at a time, till it finally stopped grinding. Kind of frustrating, but it works now

At this point my experience with my A10T's extruders is as follows: I select to change filament on extruder 1 - The printer unloads extruder 2 I select #1 a second time - The printer unloads extruder 1 E1E2E3.jpg I have updated the firmware a number of times (when ever I see that Vert has updated f...

Still no Win version - See image below:

Please advise once the file is available for download!

I am looking for an alternative tool to flash my A10T (other than Cura 4.7) in case issues I've been having are related to Cura versus other flashing options.

Thank you

I have a A10T with the GT2650v4 board. I updated my firmware with the 3DTouch file provided by Geeetech, watched their video, studied multiple posts, and am still at a loss :| As soon as I plug my new 3DTouch device in, it turns off the text on my LED panel and it overheats! The outer casing is part...

Wonders never cease....While in the process of repeatedly re-flashing the GT2560v4 in my A10T, I successfully applied an older version of firmware (1.1.8). After changing Jumper 3 (choosing two right pins instead of default=2 left), leaving the power supply unplugged, I ran a program (SmartTo Upgrad...

:geek: I used Cura to flash my A10T with Marlin 2.7 the process completed successfully according to Cura, however, I can no longer access the printer, the LCD display is lit but blank, and their is a constant high pitched beep. I looked at the GT2560v4 board and could not find a reset jumper. I did ...