Geeetech

Found more issues. ABL has once again stopped working. Not sure why. I swapped to the 3D Touch to try that out and again no dice. The left cooling fan is making noise. Then noticed that the Y motor was loose and missing a screw. I missed that on unboxing. Took it apart, reboxed it and sent it back f...

Found a new bug... If you power off the printer and pull the power cord, when you plug it back in and power it on, the print head will smash into the bed when home is commanded. This happens even if the unit is powered off at the home position, so not if it was left at some random spot. I have found...

So I have found an interesting piece of information... Disclaimer: This is Auto Level using the LJC 12A3-4-Z/BX proximity sensor, NOT the 3D Touch. I'm not sure if I will try testing the 3D Touch as I am not a huge fan of a pin possibly failing and dragging across the bed. With fighting with auto le...

1.In the leveling configuration, you need to take a measure and then set the z-offset value and save 2.titan Extruders high torque delivery filament, mainly used on M series and T series machines, because titan Extruders corresponds to a step value of 407, if you change to MK8, you need to change t...

I just installed a LJC 12A3-4-Z/BX NPN on my A30M with no success. Is there a small screw on the top of the sensor? What I did was set my manual level up at the middle of the bed. I used a 3mm disc to set the height of the sensor. I removed the disc and the turned the small screw until the light tur...

Purchased this less than two weeks ago and I've been fighting with it ever since I bought it. I have owned a CR10 since 2017 and have done several upgrades to it so this isn't my first rodeo. I purchased a 3D Touch with it and it just doesn't work. I can manually level the bed and it will lay down p...