Geeetech

There is a small part of about 2x4 cm in the center area of my plate where the filament is not sticking on the plate. See attached picture Also the plate is not really flat. I level all the corners exactly but in the middle the nose is too far away from the plate surface so my prints won't hold. I c...

I've been working on a new cooling shroud for the Geeetech A series of printers that have a single extruder. I haven't been satisfied with the extruder shroud/cooling system. (Thought I'm very happy about many of the other features this printer has vs the Ender 3.) This one uses dual 40x40 blower fa...

Bonjour à tous, Depuis quelques jours mon A20M (achetée il y a peu de temps mais qui fonctionnait normalement) ne peut plus imprimer : la buse commence à chauffer, puis le omegle xender message suivant apparait et il faut redémarrer : "Heating failed PRINTER HALTED Please reset" Quelqu'un peut-il m'...

Hello, I'm new to 3D printing. Recently, I had a problem with the hotend so I replaced it. But I don't take care about the 2 fans placements. Since, my printer often pause printing without error message. I just have to select "Resume" to continue but it's a little bit annoying for long prints. I sus...

Hi, I got my A20M about a week ago from amazon, Everything worked great initially. Suddenly it no longer detects the SD card. Tried 3 or 4 that I have here and nothing. So I've been using Octoprint with a raspi 3b+. Not as good results a from the sd but ok. Now the button no longer works at the pane...

Hello, The extruder step motor moves back and forth, but the filament does not advance. Disassembled, the motor shaft moves smoothly. I have exchanged it Speed Test essay writer for the one on the Y-axis but the problem persists. For this reason, no filament comes out and I cannot print. Model Geeet...