Geeetech

Actually the code that Cura offers me is the following. I proceeded to remove the commented lines So I solve the problem of mixing and automatic temperature preset by the slicer G28 G1 Z15 F300 M107 G90 M82 M104 S215 //remove M140 S55 //remove G92 E0 M109 S215 //remove M107 M163 S0 P0.33 //remove M1...

Also I just noticed another thing, I tried to print the classic Test cube X, Y ,, Z is wrong and despite filling 30% and layer 0.1 it is very weak

The test I am doing with different models but the printer when it arrives at the temperature set by me makes its head both with the temperature of the plate and the plate and with the mixing of colors.
Could it be a firmware issue or am I wrong?

I'll explain what happens with the photos of the various phases of the display. Given, as already mentioned, that with Cura I disabled the other "extruders" and enabled only the number 1. As you can see, following the img, everything starts well when it reaches the temperature that I set from the sl...

I don't have specific images, I wouldn't know what to send you either.
The question is simple, surely I explained myself wrong, how can I print with a single color, without acting on the display of the printer as soon as it starts, but by carefully setting the CARE slicer?

The problem that with Cura I selected the color concerned, however when I pass the file to the printer it always makes the mix of colors.
I do not understand !!!

Hello everyone, here is my second post in no time :) I am testing the A20T and through Cura I have generated a file to be printed in a single color. To do this I thought it was necessary to disable the nozzles that were not interested. Unfortunately, when I passed the file to the printer, the printe...

OK thanks

Hello everyone, I recently purchased the A20T and fortunately I came across your forum. In this regard, I take this opportunity immediately to ask if you recommend me to proceed with the firmware upgrade. Currently version 1.1.8 of 2017 is installed, I saw that version 1.0 of 2020-01-18 is available...