Geeetech

Thanks I shall remember and look accordingly

Not that I can see. The only lights are the three red leds where the cables plug into the axis motors.

Ok so my first turn on of my A10M caused a power surge that fried my PC motherboard (Gigabyte Z97X-UD3H) which is it's own issue to be resolved. However since then I have installed all the necessary USB drivers and recommended software for this the printer. When connecting and turning the printer on...

I have stripped my PC and tested each component within my PC, (who needs sleep :o ). Using the good ol' 'jump starting the PSU with a paper clip in the green and black pins' trick and I've found that the peripherals plugged into the PSU all run and power up, but when the psu is connected back to the...

Okay I literally just spent the entire evening setting up the A10M. Plugged usb into pc, flipped the switch on my printer and my pc has died and will not power up at all. Power is going through it as a lamp I have plugged into the pc via usb is showing some trickle of power but won’t turn on either....

Ok so I was looking to upgrade the 2 x bowden extruders on my A10M to 2 x Metal Titan extruders. The only Titan Metal ones I can find all state they're for the MK8. As the A10M is V7 MK10, I'm assuming these wouldn't fit? In the very near future (like 3-4 weeks) I plan to also get a 3-1 J-Head Tripl...

Excellent thanks

Hi Guys, I'm always very indecisive when it comes to purchasing upgrades as there are often so many options/types. I have my A10M on way to me and I'm wanting to upgrade the 2-in-1 hot end extruder to a 3-in-1. I've found a couple all of varying prices, examples below,I was hoping that someone could...