Geeetech

Hello, I'm thinking of picking up the A30m https://www.geeetech.com/geeetech-a30m-upgrade-auto-leveling-mix-color-3d-printer-p-1091.html And i just need some peoples advice for someone thinking of picking it up like: Is there anything i should be aware of like setup of this device and such i should ...

Hey,

thanks for the help gerry been very helpfull so here is another issue im having currently my nozzle seems to be a little runny? when it heats up anyway to fix this?

Thanks!

Hey, Thanks for the reply gaq had a look and what do you know i had it setup for 0.4 lol anyway that diffently helped but i found out but the issue is the spring is to strong which is causing the gear to dig into the filament and thats where the clicking is coming from and i do belive this is causin...

Hey, Thanks for all the help i think im actaully starting to get there now im trying to add a little extruder fan for over hangs and such and im looking for a blower the best i could find is this is that right for what im using and im guessing i would have to re-wire the end of the fan to be able to...

Hi，you said you need to adjust the stepper board voltage, you can reference board voltage range inside the picture: http://www.geeetech.com/forum/download/file.php?id=1592 Hello, so i know about the voltage range but i need to know which A4988 stepper i need to adjust since im pretty sure i adjuste...

Hi，maybe 1. The layer height value is too high, and the layer height setting value should be less than 20% of the nozzle diameter; 2. The print temperature is too low, you can try to increase the print temperature. Your help has been great pretty much all sorted and such now the only other issue's ...

Hey, (okay so an edit fixed previous issue i had) So i think im getting somewhere with the bed leveling but id like to have your opinion if i could ive got 3 images of something ive printed maybe you can tell me what caused the issues with this print im having?? This is the top of the print: https:/...

Hello, Thanks for all your support so far its really getting there so i have a couple questions. Im up to printing leveled the bed and seems fine but im getting alot of either not sticking to the bed or its not printing entirely on the bed part of it is sorta dangling off the edge. Again thanks for ...

Thanks for that william that helped alot now i just need more advice then anything im now tuning the levels of the bed and the extruder but from what i see its sorta well past the glass and ive tightened the end stop screw as far as i can what can i do? To help with visuals here is a picture: https:...

Hey, I dont know if anyone can help me im very new to this i just brought the Geeetech Acrylic Prusa I3 Pro B (My first 3d printer lol) so ive had it for awhile now (brought it in december last year) i built it the month after toke me a phew days then i had to shelve it as for months i was having is...