Geeetech

Hello @Roniedson, if you are using Cura you must set temperature for both Extruder to the same value everywhere( for example 200 Degree celcius) and also enable Prime Tower for Dual Extrusion. There is a link: http://www.geeetech.com/forum/viewtopic.php?f=98&t=62063&p=98085&hilit=cura+pdf#p98085 I h...

Hello @dga78,
i don't know about i3 pro X. But for any 3d Printer you must also install under Arduino some libraries (for example A10M Needs Liquidcrystal & u8glib libraries). Maybe you need also some special libraries?
Regards
Niyoki

Hello @vert , thank you for your comment. I downloaded also your Firmware from your discord. I saw also YouTube channel (there is much info). I asked this Question because of the new users. Geeetech products are nice, and really good preassembled. But if they put some Firmware with false Settings in...

Thank you @vert ,
I changed all A4988 Vref voltages to 1.2 Volt. Everything works smooth and not more heat than with 0.8 Volt.
Regards.
Niyoki

Hello @Mad Monkey ,
I had this too with another 3d Printer and Laptop-PC. Like vert's explanation, solution for my case was a shorter usb cable and after choosing right board also mouse click-select right com-port.
Regards
Niyoki

Thank you @vert ,
you explained nice. 3d touch pin movement is okay, it doesn't collide with the heated bed.
Regards.
Niyoki

Hello Support Team, Cura resources/definitions/Geeetech_A10M.def.json file has faulty dimensions. "overrides": { "machine_name": { "default_value": "Geeetech_A10M" }, "machine_width": { "default_value": 235 Firmware Hexfile for A10M from your Homepage /download has another Dimension 220 in real 230 ...

Hello,
i try to compile frimware for A10M with 3dtouch support. Which delay is correct 675 or something other?
Thanks
Niyoki

Thank you for Feedback
Regards
Niyoki

Thank you for Feedback
Regards
Niyoki