Geeetech

So the solution was easy but expensive.

I upgrade to tmc2208 and it's amazing, no layer shifts and the silence.. Beautiful

Hey guys,

Because of the very very bad layer fan I want to change to radial fans.

So the problem is, which setup I need to use?
Are there some very good fan ducts for the A10m with radial.

I don't want to buy 40x20 or 40x10 axial fans

Thank you

So yes I replaced the drivers...
And hell yes is that Great!!!
It was very easy.
I use Marlin 2.0

Thank you

Hey Guys, because of problems with the stock drivers i want to upgrade to tmc 2208 drivers. so they will arrive tomorrow. the Question is, how much v i need to give them? ive heared all from 0.8 to 1.2V. the one Says you Need 1.2 on the y because Layershifts. the other says use 0.8 because the motor...

Hey guys I have a big problem when printing dual color on my A10m. Things I've done _set the jerk to 10 _lower the speed to 40 mm/s _set the vref to 1.2v _enable Zhop _flashed firmware multiple times. _ replaced the belt and tighten it. _check the wheels and tighten it What can I do to fix this prob...

Hey Guys, because i had problems with all other Marlin 1.1.9 versions, i created a new one. it has all features from the stock Firmware ( Mixer and so on...) BUT i implemented Mesh Bed Leveling and made the second extruder avaliable for callibration. After the first start please click on initialize ...