Geeetech

@ _kaktus_: I used the official link of geeetech: https://www.geeetech.com/download.html?version_id=117 which contains the full shematics.... but with the mixed T0 T2 numbers..... and here we go with the physical solutions: https://www.thingiverse.com/thing:3633287 I designed a mold for a silicone s...

Hi,

I did some maintenance instructions for the 2in1out hotend.

hope it can help

https://github.com/caesar1111/Geeetech- ... tenance.md

caesar_1111

Hi, thks for the solution, but since I managed to fry 2 boards.... ...at the one board your solution might help, but on one board frying the chip did not only throw off the T0 readings but grounded T1, so I have a permanent -14°Celsius :) Ah and nice that you are showing the shematics.... they are w...

Hi, after a few days root cause analysis I found the reason: At some heater cartridges the wire insulation is not firm, moving to far and revealing the bare wire. If this wire touches the hotend, 24V voltage is applied to the hotend even when the extruder is not heating. No if the thermistor breaks ...

Now for the second time :oops: a broken thermistor on the extruder killed my GT2560 V3.0 board! The board now only shows some fixed temperatures. Is the board should not break if only a thermistor is breaking and since it is now the second time, I wonder if other users are also experiencing this iss...

Hi guys, I just got myself a new printer, the A10M and tried to get my stuff together. As always it took ages to everything aligned, all the forums, the new marlin firmware and select the right tuning parts. So I decided to do this little landing page with all my lessons learned to help you get up t...

Hi, Be aware of two things: A10 and A10M using different nozzle types! A10 using M6 thread A10M using M7 thread (but not standard MK10!) take care which M7 nozzle you are buying! I was told that you can use standard MK10 nozzles, so I bought them on Amazon just to find out, that the nozzle comes wit...