Geeetech

I'm having layer shift issues in the Y direction also. I tried loosening the rollers but the bed became wobbly. I've set the rollers so that clamp the runners just enough but I still get shifting. I also noted that the stiffness varies as I manually move the Y axis and I'm assuming I have some dodgy...

Good news - I had new parts sent to me by Geeetech Europe (I think) - anyway a new board and 4 spare stepper drivers arrived. My old board was certainly toast even though it partially worked so I swapped out the main board. It was quite an easy job. The first thing I noticed was how quiet the printe...

OK thanks - I'll contact Amazon UK and see where that leads

Hi, I have spent some time today looking at the issue and I have found that it is the X channel that is not working. I swapped around the stepper driver modules and Y and Z work normally but X now does nothing at all even with a known good stepper module. I also have a problem with the extruder and ...

Hi - my A10 printer is just a week old and has made some great prints with very little issues but today there was smoke from the electronics housing and on inspection I found a burnt stepper driver board. Not sure how common this is and if it indicates a fault with a stepper motor or wiring but I wo...