Geeetech

This looks like your nozzle is too far away from the bed, check your bed leveling using the paper method or better still feeler gauge

Technically Z 0.00 should be touching the build plate, if you look at the g-code of a sliced model at the beginning you see that the slicer gives out a command to raise the nozzle to your layer height or first layer height before it starts its print. You may need to add another -0.12 or whatever thi...

sorry for not replying but it seems like all my posts require mod verification before they show and is painfully slow. So i resorted to other forums. I bought the RepRap 12864 LCD Graphic Smart Display and just done a straight swap. The display was cheap enough anyway. One thing to note is for the L...

hmm. I'm curious about this too as I'd like to take the load off the board.

i bought a new full graphic smart controller, anyone knows if this is simply a straight swap over?

Hey, can anyone help me verify I have a dead LCD screen before I go ahead and order a replacement, please? I was tiding up the electronics, putting everything into a nice enclosure and when I had finished and powered up the printer my LCD screen shows just black boxes. I have checked all connections...

Can't seem to delete this post. Anyway, after taking a step back and tackling it later on in the day, I found it was down to human error, the calipers that I using weren't zeroing out correctly, solved the issue for the most part. Still experiencing some inconsistencies but they somewhat minor and I...

Would someone be able to help me resolve an issue with calibrating the extruder to extrude the correct amount of filament, I've spent the whole day on this, trying various things to get this working correctly. A quick search of the forums here showed nothing relevant to me I'm measuring up from the ...