Geeetech

Sorry for my ignorance but should I be measuring ground to 5v and then ground to 3v3? What should those readings be? plugged into usb or 12v PSU?

I just bought a GT 2560 and plugged it into a 24v power supply. Bang! The PSU fizzled out. Now the board won't recognise when plugged into the PC but the lights come on and it sends power to the LCD (Just a green light). I've plugged it back into the 12V power suplply and checked the voltage on the ...

Hello, I have a Geeetech Aluminium Prusa i3 I was having a problem with my heat bed temperature reading where it was stuck on 69 degrees.I unplugged the cable from the board and it is still showing the same reading, when I did the same for the extractor nozzle thermistor, it reset to 0/0. I checked ...

I’m having some trouble with my newly built Prusa i3 Aluminium from Geeetech. After assembling, the Z axis that carries the motor has been getting stuck on one side when I try to electronically raise it through the software. Steps taken: Disassembled rods and threaded inserts to make sure everything...