Geeetech

Hi. ad1. read all information on this subforum. You will find links to my private gallery. ad 2. At the moment, you should have no problem buying any type of filament worldwide. For some time now I have been buying a filament locally, in my country. I am satisfied with its quality. When you manage t...

Hi.


If you have not yet solved your problem, I have a small hint for you.

The stepstick modules have jumpers for configuring step resolution.
Check if they are equally set and if they are set correctly at all.


Greetings.

Hello.

Probably not to be conquered.
Our model has not been supported for several years.

The alternative is any other controller board and 32bit Marlin firmware.
But you have a lot of work to do.

I got it to complied without errors, WOW. Great work, thanks. I do have a question about the Variant STM32F103VE. In Marlin it says that it is for the #define MOTHERBOARD BOARD_GTM32_PRO_VB, but I have the GTM32 Va(non pro), and the board silkscreen says GTM32 VA, as from the pictures I have seen i...

TheDuke wrote: ↑

Sat Jun 13, 2020 8:40 pm

Hi _kaktus_ I have to agree with colcolo... this schematic is not readable

Any chance you could get readable (higher resolution) version, maybe even original PDF...
...

Hello

If you are still working on this topic, please contact me at kaktus_j_p@o2.pl.

Hello.

Be kind. Write in English.

Hi.


The hardware must be taken into account for the calculation.
Different modules have different resistors to limit the motor current.
I made a presentation here.

Hello Klassr.


When I looked at the pictures you posted, my attention was drawn to one disturbing fact.

It seems to me that the connector body you used is mounted in reverse.

It's worth verifying. I don't know this new module.

Hi algernon.


What you're doing is great, and beautiful.