Geeetech

Bonjour à tous.
A la mise sous tension, l'axe Z monte, l'axe Y commence à avancer, puis l'imprimante produit un son long et s'arrête.
Si je chauffe, le bed est ok, mais la temperature de la tête monte à 140° puis s'arrête de chauffer.
une idée?
J'ai changé la tête , toujours pareil.
Merci

For those who want to unclog A10T head.

Hello,
The Hothead A10T is a superb piece.
I want to know the setting of your headless which press on the balls of each output. I think a quarter turn back should be good value.
Do you have any info..
Thank you very much.
Picco

To upgrade the firmware, in my case impossible with Toolkit, Xloader succeeded at the first time.
https://commodore.software/downloads/do ... ader-v1-00
If that can help you.

Thank you William, but it is in Hex format.
I wish to be able to adjust the steps for each extrusion motor.
In this format impossible.

Hello,
Can we have a marlin for the A10T?
I have an extruder with 4mm difference compared to the others.
You can't just set an extruder on the machine.
Thank you.

Hello William,
I don't have photos, but with two extruders, Color Mixer works.
With three he plants. As well with Repetier as with S3D.
Only the Color_Mixer__V1.1WinBETA version seems to create a usable Gcode.
I am waiting to receive the A10T, but the tests with Color Mixer are not good.

Regards

Bonjour à tous.
J'envisage après l'A10M une A10T.
Je vois que le soft color mixing plante toujours sur 3 couleurs.
Quand ce soft fonctionnera t'il correctement?
Avez vous une autre solution?

Merci

Hello,
The resistance is fully operational. No open circuit.
Resistance varies well depending on the temperature.
From the bed to the welds on the map everything is ok. I have electronics training.