Geeetech

Sure can't complain about the help you get on this forum " BECAUSE THERE IS NONE"

I have tried changing the true false setting in the firmware and nothing changes I have changed the x y axes wiring, then the y axes does not change direction no matter what you change in the firmware. This thing is driving me crazy I have spent many hours going through the forum here trying to find...

Everything seems to run well but the extruder, the reason causing feed failing may be lacking of enough pressure in the extruder, here is the detailed way to drop the problem out. http://www.geeetech.com/forum/viewtopic.php?f=19&t=18507 Ok I guess I did not explain enough on my first post I have th...

I have a Geeetech I 3 pro B printer with" GT2560 rev A" circuit board. All was working well. Then during a print the Extruder stopped feeding the filament. I have tried the Extruder motor and it works when power is put to it. I have changed the wiring cable with a new one and it still doesn't work. ...

William wrote: ↑

Tue Jun 27, 2017 4:14 pm

Hi,
We have met and solved the similar problem about motor only going one direction,here is the website link:http://www.geeetech.com/forum/viewtopic ... 18&t=17883

Ok I have checked the topic but still did not help.
But I did find the problem and I am now printing again

There are a few things you can do to narrow down the problem 1. Plug swap the driver from the Y, Z or extruder for the one in the X slot. This will tell you if the stepper driver is bad. 2. Swap motors, the stepper motor may be bad. When you home the printer does the X motor back up after hitting t...

Please I need help !!!!!! :oops: :roll: I have a Geeetech i3 Prusa pro B It has been running well, but to day for some reason the X axes will only move towards end stop and will not change direction. I have changed the end stop in the firmware but nothing changed at all. Then I changed the motor dir...

I have connected my old board to the printer and the LCD works correctly so there has to be some part of the uploaded firmware missing for LCD in the Geeetech I3 Prusa Pro B that I used for the new board GT2569 rev A+.
And I did use the firmware from Geeetech forum for Geeetech I3 prusa Pro B

What is the point in this forum ? Ask for help and get no answer or told to download EASYPRINT which does not fix anything at all !!!! Because printer still does the same thing Geeetech is really failing in the help and service department I will be sure to let others know when they ask about 3 D pri...

Ok I have tried the Easyprint but it made no difference
Is there any body there that can tell me what I can do to make my LCD 2004 controller work correctly ?