Geeetech

Hi, seems like I got it somehow working. The slide somehow blocked the movement at two spots which I could resolve by moving it up and down by hand for quite some time. Maybe there was some dirt or something causing this issue. Now it works at least in the center as expected and only with small stut...

Hi, I checked the connectors off the motor and on the board and they are all correctly plugged. I also measured the voltage of all of the drivers and they are all between 0.8V and 1.2V as recommended. Below is an image of the board, maybe this helps - beside that, which of the drivers is responsible...

Hi, first,check the Y axis motor if it works; Well, that's the problem (sorry if this wasn't clear in my previous post): The problem is that the Y axis motor doesn't move but instead produces the loud chattering. I checked the gears and belts again and as far as I can tell everything looks fine here...

Hey guys, yesterday i received my new Me Creator 2, so I got to get started with it today. After setting up everything as described in the manual I tested the motors. X and Z seems to work fine but the Y-axis won't move more than a few millimeters before the motor just starts to slip, which results ...