Geeetech

Thank you

I have had this printer since last Christmas and not been able to get it printing properly so any help to get it up and running would be very much appreciated. I have a Geeetech Pro X which I have just changed the temperature sensor to remove the error message on the Lcd which now works. I then try ...

I have a Prusa 3i ProX with MK8 Extruder Hot End which I have just assembled.

Somehow when attempting my first print I jammed the nozzle and in trying to remove the blockage pulled out part of the Teflon tube. Does anybody know of any Youtube videos on how to change the nozzle?

Kind regards,
John

Completed build of my i3 pro x and extruder not heating up when set to manual in Repeteir host software.

I have just completed the build of the Prusa I3 X Pro and have the following issues: 1. End stopper on the Y carriage not working. 2. Extrude carriage on the X Axis running in the wrong direction. Anyone kind enough to respond could you please keep any advice as simple as possible as this is the fir...

I3 Pro X

After assembly the extrude carriage is not sliding smoothly on the y axis. The y axis looks horizontal and the x axis are vertical. I was wondering if sanding the y axis rods with emery paper would help.

Thank you for the response.

Cheers,
John

I am in the process of building a prusa I3X and after I have assembled the build platform it does not run smoothly on the rails. I was wondering if applying WD 40 would help or is there something else i could do. Also when cutting the Y belt is it best to ensure it is a tight fit or leave some slack...