Geeetech

epic fail

I took the 21. Nov. version of RCbugfix and read every line of the conf twice.
every time I forget to disable "#define BLTOUCH"

Sorry

... Testfile is printing and looks good

Now, the new RCBugfix with your conf, the 10mm z-Test-file has a high of 9,5mm...
I dont get it

Now, i use this version:
https://github.com/galorin/Marlin/tree/ ... evelopment
its RC7 but with GT2560 Board specs and it runs great!

Ok, I send M502 and M500 and with with this Conf optimizations (original Geeetech Conf): //#define PIDTEMPBED #define INVERT_X_DIR false #define X_MIN_POS -10 //#define AUTO_BED_LEVELING_BILINEAR //#define Z_SAFE_HOMING //#define EEPROM_CHITCHAT my test File 1 (Z, 10mm) has a high of 9,50mm and File...

Yes, original Geeetech Pro B Acryl, default metal parts (Z and Extruder).

Strange, with your 14. Nov. version also the bed temp. wont go over 50°C.

With the default FW (http://www.geeetech.com/forum/viewtopic ... 20&t=17046) (GT2560), I have no problems.

With this conf, my Pro B prints with half high an half extrusion.
example: Test-Print high is 2mm (STL), final print 1mm
X and y 100% correct (better than the original Geeetech)

I disabled "define AUTO_BED_LEVELING_BILINEAR" and Invert X is false.