Geeetech

Thanks I'll try!

Maybe should be explained better int he manual

The calibration procedure is clear, no problem I calibrated the printer with the first hotend, the problem is that I can't bring the second at the same eight with the first. After unscrewing the M6 nut I have to rotate more than 1/2 turn the block to bring it lower, but I don't have the space to rot...

hi!

For now I've attached a pic.
As you can see if I rotate the blocks, over a certain angle the edge of the block collides with the other one, is not much but enough to prevent more rotation.

Hi I've assembled a G2s pro, and everything is ok. I can print perfectly with first extruder, but I don't understand how to bring the second nozzle level with the first one. The instructions say to loose the top nut and screw the barrel. The problem is that after a 1/4 turn the barrel of the second ...