Geeetech

It looks as if the firmware that i used was for a single head extruder. so if it got the command to print with the second head it did not understand where to go.

Thank you very much. It worked.

here is a short video that demonstrates my problem. Firts color prints perfect, but as soon as it has to print the second color it goes up in the air, but the display still hows it is on the first layer. Please can someone HELP me!!!!!!!!!!! Here is the link to youtube: https://youtu.be/haedxvjPD00

Thank you. Tried it, but had the same problem. got hold of settings in the firmware and after a lot of hours i got the problem solved. Thanks for the reply :D Got a new problem since i tried to print in 2 colors. 1st color print perfect, but when 2nd color starts the heads lift to about 180 and prin...

Ive got a problem with my 2nd extruder. If i print one color my prints are perfect, but if i print 2 colors the 1st color print perfect, but as soon as the 2nd extruder start working the printer goes haywire. The heads lift up to about 180 high and print in the air and when it have to print the 1st ...

Got a Delta Rostock mini G2S Pro. When I centre my print head on the bed, and move the head in any x,y direction it lifts about 5mm. Can sombody please help me with this problem, because as long as that happens i cant print anything with this printer.