Geeetech

1. PSU is fine (U = 12.008)
2. Power connector is fine (U = 12.008)
3. Both fuses are also fine (U_1 = 12.008 and U_2 = 12.003).
4. The 5 volt for the meanchip are perfect (U = 5.035 Volt).

Any ideas?

1. Yes before the 30. of August it was possible to print objects with less less then 4 hours. Since two days the mainboard does not respond anymore. Either RepetierHost nor the Arduino IDE can connect. I can't use my printer anymore :cry: :cry: :cry: 2. From the speaker near the LCD screen. 3. Yes I...

Today I started another job. After 5 minutes the printer stopped immediately. A long beep sounded, never stopped, and no sign was on the LCD screen. The printer looks like dead. I have no idea to bring it back. After some time I also tried to connect via Repetier-Host V1.6.2 and no connection can be...

1: Already done. I used 0.8, 1.0 and the maximum of 1.2 volt. 2: Look at the picture below. I'm using the http://www.thingiverse.com/thing:1307720 , which was printed by a friend. 3: My retraction settings are: 50 mm/s and 0.9 mm. The settings are fine until the 4 h border is reached. More important...

Hello together, since a few days I'm able do use Geeetech Prusa i3 X printer more or less. The first problem was solved by the Geeetech team really nicely. Now I'm waiting for a new part. A few days ago I run into another problem. I started the first print jobs with more than 4 hours. From the first...