Geeetech

Hi

yes i had to change the bedsize, cause when i try to change Y_MAX_POS Y_BED_SIZE,
to less than bedsize, the compilation wont work

for me the good option was that: keep bed size as 200x200, change Y_MAX_POS Y_BED_SIZE to 150 for example, but doesn't work

thanks for the help

Hi All, I have a geeetech I3 Pro C, modified as a P3Steel, with LeadScrew T8 for the Z axis. I also added a BLTouch for Bed leveling; I have a problem with the Y-axis. The bed size is 200x200 , but i only can move 130mm and not 200mm I have check the step_by_mm value (80), which should be it. I had ...

Allo Geeetech???

any reply from Geeetech would be appreciate....

Hi, One advice i learn from the geeetech printer : prepare to have multiple "upload" of your firmware to the printer. basicly, you will need to download the Firmware from the geeetech forum (http://www.geeetech.com/forum/viewtopic.php?f=20&t=17046) Then, upload it, it should be the one you need. If ...

Hey

Probably a Marlin Configuration problem.
You should probably adjust values in the
#define DEFAULT_MAX_FEEDRATE
or something like that

Hi,

I can't get any answer from customer service, so i post my request here...

It's been more than 1,5 months, i made and order, it has been shipped, but still didn't received it.
The tracking has the same status since 1,5 months, but i think there is a problem

what can you do?

thanks

anyone?

Hi, I'm having the I3 Pro C, and i have a problem with the speed of my printer. I'm using Host Repetier & Slicer to configure my prints depending on my needs. But no matter what i do the printing speed is really slow. In fact, even if i change the speed, for example from 50mm/s to 100mm/sec, i see n...

any idea?

Thanks