Geeetech

Thanks William.

So is it still correct value "1" (100k +4.7k pullup)?
Same as MK2?

Thanks,
Ferb

Hi Dragonlord. Same question here, just upgraded the MK2 to the aluminum heatbed and I'm wondering if I've to change some settings in the configuration file (using Marlin). Datasheet says that the NTC-MF52AT Thermistor has "Resistance value at R25℃ = 80KΩ". Did u measured 10KΩ at normal temp? Bye, F...

It turns out that it was the slicer OR Repetier (both 1.6.2 and 2.0.0). With Simplify3d I was able to print the object correctly... Now I've to try the other one that have the same shift problem. I'm not able to understand what happens: after tons of different printed object, I found 2 different fig...

I recently upgraded my Repetier version to 2.0.
I've restored the 1.6.2 but result is the same (just printed: same Y layer shift).

I've give a try to Simplify3d: will come back.

Thanks

the strange part of this is that: 1) my first attemp of printing that piece I had a Y shift. 2) the 2nd time the shift occours on another heigth. 3) then I printed another object and it was fine. 4) the 3rd attempt the shift occours at the same height of the 1st attempt. 5) after swapping the Y and ...

unfortunately I had the same problem.
I've switched the Y cable with one of the Z axis and the result is the same.

Now I've rotate 90° left the piece, I'd like to see if the shift will occour on the X axis...
Then I'll try switching the cable with the other one of the Z axis.

Thz rotormansa! Actually the cable is the only part I didn't checked or switched. So, to give a try, can I switch it with one of the Z axis? Or I can switch with the X axis and check if it will shift on that direction ;) But why is it so random? For example, yesterday I printed a piece (2 hours) wit...

Hi all. I've a Geeetech i3X (Acrylic) and 'till now I haven't any big issues (1 year of happy printing!). But, since a while (1 month or so), I'm experiencing a strange Y layer shift. Attached my last print ...it's supposed to be a cube... I tried to: 1) tensioned the belt (many tries). 2) changed t...

Thz William.

I noticed that both versions (single and dual extruder) are based on Marlin 1.0.2-1.
Is it possible to update to Marlin 1.1.0-RC6?

Comparing the Marlin 1.0.2-1 with the I3X version, differences are minimal.

Thz!

Hi all!

Is there a way to have an updated version of Marlin?
I've a I3X and I'd like to update my Marlin to the latest version!

Thz!