Geeetech

Anybody? I'm going to order this bracket! But does this fit on the acrylic piece where the extruder for a single extruder is attached to? http://www.geeetech.com/Documents/Building%20Instructions%20of%20Geeetech%20Prusa%20I3%20X.pdf => acrylic extruder piece I have! Bracket I'm buying for dual extru...

Hello Everybody, I have following Prusa I3 Printer https://nl.aliexpress.com/item/2015-Upgraded-Quality-Full-Acrylic-High-Precision-Reprap-Prusa-i3-X-DIY-3d-Printer-Kits-High/32409800856.html?spm=2114.13010608.0.0.fEoPN6 After having it for a year, I wanted to have 2 extruder attached to it. This on...

0V on all the volt setting (didn't really know which setting to set to measure) AC input(between "L" and "GND"),DC output(between "+" and "COM"). + and COM of both give me zero with or without the board attached. L & GND give me fluctuating -0.1 to 0.37 on the multimeter V -- EDIT!!! L & GND on the...

@DQW Yep,should be on. Ok I tested de PSU while connected to the net but not to the board. 0V on all the volt setting (didn't really know which setting to set to measure) Then I plugged the Board on it and still 0V on all setting. So I turned the potentiometer and tested again, 0V, turned it the ot...

This might be a dumb question.

But do I put the PSU ON and connected to the electricity? When testing with multimeter.

First check if you have the L/N/G cables correctly connected,then check the 110V/220V switch on the PSU. This I already did with first malfunctioning and second malfunctioning psu. The next move is to unplug the board from the PSU and measure the AC input and DC output with a multimeter. Do I measu...

Can it be overloaded from the first connection? It instantly did not work.

No green light only the light from the I/O was on. How do I prevent overloading.
And more important how did it suddenly become overloaded? It wasn't overloading before.
Thanks

Same PSU , no the GREEN light doesn't go on but the light from the I/O does go on.

I have the prusa I3 X acrylic.

The green light doesn't go on with the new one. So my guess it wouldn't go on with the older one. The light from the on/of button does go on??????

I had this problem after a year of usage, it suddenly stopped working.

I ordered a new one on geeetech after asking the type of my psu. I installed it today and the same thing happens. nothing.

I hear a slight buzz. But nothing powers on?