Geeetech

Unfortunately noone has replied nor given me any extra information. Im looking at removing the GTM32 Board as it not that great for the flexibility i need replace it easily with a RAMPS 1.4 running marlin which wills support the bedsize, auto bed tramming with induction sensor and multi nozzle extrs...

Hi All thought this would be the best place to start. On my current printers that we use the RAMPS 1.4 and ATMega2560 we have auto leveling setup with an induction sensor which is pretty simple as we use a metal plate and marlin firmware has it all in there. I am wondering how would i go about setti...

Hi Mark, Print bed has been leveled and nozzle height has been set to 2 sheets of paper above the print bed (2x80gsm). I have also tried extruding from the zero'd height manually and that works and tried moving z-axis away to try print dose not print. When the print job starts the LHS fan extruder m...

Hi All, Sorted out several bugs still not to get a sucessful print job. I have now ran into the issue where i can send the print from computer or SD card however it will not extrude filament where needed (both steppers 0 and 1 do not move. However when i extrude manually in Repetier it works as does...

It would seem as if that would be the case. unfortunately i do not have a glass print bed that i can mount to trial. Not sure where to go from here Thanks for the thread link went though the process for the new instructions Z-mount now works spot on. Spending time to go though the wiring now hopeful...

Hi Geeetech, I have finally had the chance to build the M201 that i purchased late last year. I have several bugs that i am unable to simply work out. 1. Aluminium heat Bed - The bed has a curve making it impossible to print any job running across the 280mm front of it the curve is uniform from fron...