Geeetech

Sorry...forgot to mention it is a Prussa I3X pro printer

Yes I did.....could not figure out why it thought it was 80 all the time.....new gt2560 took care of it...I tried flashing the firmware...did not help

Well I changed out the GT2560 board...working again...not sure what was causing it but that fixed it.

[attachment=0]y_-_axis_idler.7z A few STL files I have for the pro x

It appears the tape came loose under my heat bed and the thermistor wires shorted....I started getting a max temp error....I uncrossed them and secured them but my LCD panel shows 80/0 all the time and the "H" is on. If i unplug the thermistor from the GT2560 board it still shows 80/0 with the "H".....

I have got mine printing fairly well now....here is a few tips for those that are just getting one..... Put washers on all the screws...there is plenty in the bag but they don't tell you in the instructions. Leave the belts long...do not cut them until it is all together and your sure you understand...

I have a few....won't let me upload here...let me know where to send them....

Sorry.....should have mentioned....I removed the filament and reduced the spring pressure....

My extruder motor makes a noise and tries to move but it just bounces back and forth a small amount. I have a spare motor and it does the same so it's not the motor. It was working fine then after a print I went to use it and it started doing this. Motor voltage is good...not sure what to try next.....

Thank you...but how do I know what to copy and what not to?