Geeetech

Removed G29 command and finally got it printing......:) I think i will change the hotend to alu so that i can print nylon as well....the original hotend on the delta rostock mini g2 can handle just about 240-245 Celsius on my machine....but i think for the most, i will be using PLA because of the sm...

Thanx a LOT for the help mark:) There was a few lines missing in my own configuration that i found in your version: //=========================================================================== //============================== Delta Settings ============================= //==========================...

Thanx for the help, but it seems i am stuck at the same problem.... The three pictures attached are take after homing and loqered in manual control. After the homing z axis.is at 193 and x and y axis are at 0. I just noticed that when i manually run z axis it seems to go on the outside of the define...

The endstops are mechanically well fastened, if that`s what you are asking about:) And they are working well showing "open"-value on all max endstops when they are open, and "open" on z_min when triggered. LCD "problem" is now solved.....I had to #define ULTIMAKERCONTROLLER....of course:P But my mai...

Hello! I have just put together a delta rostock mini g2 and i have come to the point where i have successfully homed all axes. However....When i am trying to manually drive the z-axis down towards the bed while pressing down-button in repetier-host for setting the final z-axis height, both x and y a...