Geeetech

here is what i found seams to be working

Has anyone added an inductive sensor to there Delta Rostock mini G2s i have made the new platform and installed the sensor just not sure how to attach to the control board the only info i can find shows the RAMPS 1.4 board just not sure how to wire to the GT2560 http://cdn.instructables.com/FCY/959C...

Mark wrote:The firmware for G2S is here.

yes i have that i just would like to take a look at some code from a machine that works

does anyone have a unit that is up and running and can send me there firmware i have tried to change settings but still cant get this thing to extrued any PLA everything esle works great

ok looks like the problem was in this code // delta speeds must be the same on xyz #define DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 80, 93} // default steps per unit for Kossel (GT2, 20 tooth) #define DEFAULT_MAX_FEEDRATE {400, 400, 400, 45} // (mm/sec) #define DEFAULT_MAX_ACCELERATION {5000,5000,5000,1...

i have tried all combinations now the extruder just pulses

Hi Mark this did not work now my steppers on the x and z post drive the wrong direction when i try to home it

i am having the same problem i have the G2s

what was the fix for this my extruder drive the wrong direction if push retract it extrudes if i click extrude it retracts

Hi there, i purchased the same printer with dual extruder... First of all i found several problem in the assembly instructions, like there is nothing about G2s... BEWARE WHEN PLUGGING THE NEW POWER SUPPLY INSTRUCTIONS ARE WRONG Burned mine by following their instructions!!!!! Hacked a 400 Watt PC p...