Geeetech

Yes I have found that if I go to Control on the LCD and scroll down to Reset failsafe my extruders will work, However I am finding that I have to do that everytime I turn off then back on.

I would also like to say that I have heated the heads to 185/220c while testing. The firmware went in great, but still no feed either motors. Have tried many different stl files. This is my second printer, so I do have experience using them. and am proficient at soldering and basic electronics. I re...

I installed the firmware and now have all my options on the LCD back , but my extruders still are not running. It seems I've tried everything.
As said in my first post the Extruder Steppers and the driver boards are working when switched to the other axis on the board.
What do I do now?

Thank you for sending the Firmware so quick. I uploaded and have my options back, but when printing the Extruders do not move, tried several things, motors are good, and the driver boards work when swapping with X Y and Z . However the Extruders when plugged in their correct positions Bob nathotel@g...

I received my printer last week, I finished building on Saturday. Tested a print of test block. Had some trouble, will not feed filament, tested the stepper motors on x axis terminal and they work. I switched stepper drivers, and still did not work. Then following your information used Arduino and M...