Geeetech

Can't find sanguino as a option. (see picture)

How do i install it on the arduino?

i found the answer to why it doesn't work.

the X- Stepper Driver Module conduct no electricity.

I Changed places with the Y-Stepper Driver Module and the X-Stepper Driver Module and the x started gave 0.9 V and the Y 0.9 V.

i Tested all the GND and the last one over the x motor input made sparks......

the GNB x-motor is 0.9 v now after i fixed it. it was 0.12 v.
I can move the x-motor with ease.

The PSU is at 21.3 V after i turn the power down from 24,8 V. the problem is that I can't turn it down any more.


Wrong cable input in the PSU?

i updated the firemware but to no succes.

The y-steppmotor goes the wrong way and the x-steppmotor have no power to move the extruder.
the fan works good ant the z-motor works good.

Do you have any idé what I have missed?

PS. The fan works fine

oki Ill try to fix it but the y-motor will go in the wrong direction thats why I plugged it that way.

Something new I notest by accident.

I took of one cable (accident) for the z-axis motor and everything worked perfektly exept it was just one z-axis step motor on.

Is it underpowered?

Hi, I bought a pursa i3 pro B and everything works exept the x-axis. It moves with no problem to the left but not to the right so the extruder will move to the left until it hit the side and crash. Auto home works for every axis. New discovery. I took of one cable for the z-axis motor (accident) and...