Geeetech

I need to replace the hotend on my Prusa I3 3D Desktop Printer (worn out from taking it apart so many times). The hotend that I have looks exactly like the one in this picture: http://www.geeetech.com/mk8-dual-extruder-p-921.html I am not seeing a replacement for the hotend that I have, I was thinki...

I have a Acrylic Geeetech I3 Pro 3D printer. I was have recently replaced the extruder and now I am having an error when the printer starts up. I was wanting to look at the wiring diagram to make sure that I wired the extruder up correctly. I noticed that the wiring diagram is not for the RAMPS boar...

Eric,

I have a Geeetech I3 pro 3d printer with a ramps board. My printer only has a single extruder.

Thanks

Jerry

Having issue and would like to reload firmware. Can you please send me a link to the latest RAMPs 1.4 software.

Thanks in advance

My extruded motor does not turn when plugged into the extruded port on the ramps1.4 board. If I plug it into the x port it turns as expected. I have tried changing the stepsticks between the two ports and I am still seeing the same behavior. Does anybody have any ideas? If not I guess I need to talk...

I took the I3_Ramps_ino.zip which you sent me and built the firmware and uploaded to my printer. The message on the LCD display changed slightly as a result of the upload. The first attachment shows the new screen (img_0218.jpg). The second photo shows what occurs when I tell the printer to move dow...

I have a Geeetech I3 Pro printer with the 1.4 ramps board. Not sure why, but my end stop for my z motors seems to be reversed. I have to manually push down on the end stop so the motor will go up. The end stop has no effect when the motors are going down towards the glass. Has anybody else had this ...

Will try thanks!

First time I powered my Geeetech I3 Pro on I received relevant information on the lcd screen. Since that time nothing is being displayed on the screen. Using the Repetier software it says it can connect up to my printer, but when sending a file to the printer nothing ever happens. My printer is usin...