Geeetech

Sorry for the late reply. I am using MatterControl for my 3D printing software. The settings I changed was: On the woman body: No infill/set to 0 (I did this because my nozzle was hitting the infill after it hardened and was messing up the layers. Since there is no infill, I put led lights on the in...

Sorry, forgot to attach the pics:

Hi, I liked the girl you printed and decided to print one myself. My settings overall are different than yours (I am using mattercontrol for my 3D printing software and a wider nozzle [long story to how I ended up with a wider nozzle]). However, no matter what size I printed, I did notice the line p...

Here are some more setting I changed. I slowed down my perimeter print speed, increased my perimeter wall to 4 (number of external layers or shells), and increased my extrusion multiplier to 3. I have learned 3D printing is a trial and error thing. You may need to play with those until you get what ...

Ok. Problem fixed. I slowed down my perimeter print speed, increased my perimeter wall to 4 (number of external layers or shells), and increased my extrusion multiplier to 3. FYI: For anyone else that might be following this, I am using Matter Control for my 3D printer software. The other one has th...

Hi begizmo, I used to get bad prints like yours when I first started. It is a settings issue. Try lowing your print speed on the perimeter. I use MatterControl for my 3D printing software/interface. How it works is not really better than the other one, but it has a way better visual look. Also, you ...

Thanks animetown9!


zhangxueyou,

How long did the i3b parts take with your settings?
(Nozzle diameter:0.3mm
First layer height: 0.3mm. Others:0.2mm.)

How long did it take to print those parts with your specs?

(Nozzle diameter:0.3mm
First layer height: 0.3mm. Others:0.2mm.)

Ok. I will give that a try and let you know. Thanks.

Hello, I have the GeeeTech i3B printing ABS filament. When I print 3D parts, any overhangs (Cliff type edges) sag. In my example pictures, you can see under the dogs chin, the ABS dose not stay in place. It sags down. I tried printing the perimeter at 80%, 60% 30% and 20% speed. It still sags. I tri...